Color Changing RGB LED Strip Kit 5 meters 300LED

Specification:

--IP Rate: Waterproof SMD5050 Flexible LED Strip 300LEDs, IP65, IP68
--LED Light Source: 5050 SMD LED,
--Beam Angle: 120 degree
--Working Voltage: DC12V, 72W/reel, 6A/reel
--Number of LEDs: SMD5050, 300 leds/reel
--Length: 5 meter or 16.4 feet of each reel
--Dimension: 500mm*10mm*0.2mm
--Certificate: CE & Rohs
--LED Strip Type: Flexible LED Strip
--Cuttable Style: 3-LED Cuttable
--Lifespan:>50000 Hours
--Adhesive: PCB with self-adhesive back or clipers
--Warranty :2 years
--Color: Color Changing

LED Lights Kit includes the following items:

1.  1 x DC12V 8Amp Power supply that can supply enough current for up to 5 meters of Tri Chip RGB SMD 5050 Flexible LED strip (300LEDs). Available with North American or European plugs
2. 1 x 8 Keys RGB RF Controller
3. 1 x 16.4 feet (5 meters) Tri Chip SMD 5050 Flexible LED Strips 300 LEDs.
4. 1 x DC Plug.

1:Non-waterproof Flexible LED Strip: PCB (Printed Circuit Board) material with self-adhesive back.
2:Waterproof Flexible LED Strip--Surface Injection: Except it PCB material is encapsulated with plastic Gel at surface, with self-adhesive back, Water resistant coat (IP65).
3:Waterproof Flexible LED Strip--Whole Injection: Except it PCB material is encapsulated with plastic Gel at both side. without self-adhesive back, Water resistant coat (IP68).

Direction for use:

1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not
occur between connecting wire before you turn on the power;
2. Adopt film button and RF for controlling,there are 8 buttons in all, the function of each key as follows:
(1): you could turn on/off controller at any time;
(2): Play/pause button,it is convenient for you to see the static effects of led;
S(3)+: The step of the speed change add 1 by each pressing;
S-(4): The step of the speed change subtract 1 by each pressing;
B+(5): A brightness control button,the step of the brightness add 1 by each pressing;
B-(6): The step of the brightness subtract 1 by each pressing;
M+(7): The NO. of patterns add 1 by each pressing;(refer to the following form)
M-(8): The NO. of patterns subtract 1 by each pressing;

Applications:

--Border or perimeter lighting.
--Sign back light
--Shelf light
--Architectural decorative lighting .
--Use indoor and outdoors (Silicone or Gel Type only) use  to highlight areas.
--Concealed lighting
--Cove and under cabinet lighting.
--Deck lighting