SMD 5050 LED Strip Kit 5 meters 150 LEDs

Specification:

--IP Rate: Waterproof SMD5050 Flexible LED Strip 150LEDs, IP65, IP68
--LED Light Source: 5050 SMD LED,
--Beam Angle: 120 degree
--Working Voltage: DC12V, 36W/reel, 3A/reel
--Number of LEDs: SMD5050, 150 leds/reel
--Length: 5 meter or 16.4 feet of each reel
--Dimension: 500mm*10mm*0.2mm
--Certificate: CE & Rohs
--LED Strip Type: Flexible LED Strip
--Cuttable Style: 3-LED Cuttable
--Lifespan:>50000 Hours
--Adhesive: PCB with self-adhesive back or clipers
--Warranty :2 years
--Color: Color Changing

Description:

LED Lighting Kit includes the following items:

1.  1 x DC12V 5Amp Power supply that can supply enough current for up to 5 meters of Tri Chip RGB SMD 5050 Flexible LED strip (150LEDs). Available with North American or European plugs
2. 1 x 8 Keys RGB RF Controller
3. 1 x 16.4 feet (5 meters) Tri Chip SMD 5050 Flexible LED Strips 150 LEDs.
4. 1 x DC Plug.

1:Non-waterproof Flexible LED Strip: PCB (Printed Circuit Board) material with self-adhesive back.
2:Waterproof Flexible LED Strip--Surface Injection: Except it PCB material is encapsulated with plastic Gel at surface, with self-adhesive back, Water resistant coat (IP65).
3:Waterproof Flexible LED Strip--Whole Injection: Except it PCB material is encapsulated with plastic Gel at both side. without self-adhesive back, Water resistant coat (IP68).

The Red-Green-Blue color-changing  LED Strip Kit is money saving and energy saving. If you need color changing LED Strip Lighting, then this Kit will have everything. you need. Just plug it in and it works.

Direction for use
1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
2. Adopt film button and RF for controlling,there are 8 buttons in all, the function of each key as
follows:
(1): you could turn on/off controller at any time;
(2): Play/pause button,it is convenient for you to see the static effects of led;
S(3)+: The step of the speed change add 1 by each pressing;
S-(4): The step of the speed change subtract 1 by each pressing;
B+(5): A brightness control button,the step of the brightness add 1 by each pressing;
B-(6): The step of the brightness subtract 1 by each pressing;
M+(7): The NO. of patterns add 1 by each pressing;(refer to the following form)
M-(8): The NO. of patterns subtract 1 by each pressing;

Applications:

--Border or perimeter lighting.
--Sign back light
--Shelf light
--Architectural decorative lighting .
--Use indoor and outdoors (Silicone or Gel Type only) use  to highlight areas.
--Concealed lighting
--Cove and under cabinet lighting.
--Deck lighting